Detailed Product Description

 Automatic blow molding machine

1-     Machine Description

HB stretch blow molding machine is suitable for producing PET plastic containers and bottles in all shapes.
It is widely used to produce the carbonated bottle, mineral water, pesticide bottle, oil bottle, cosmetics, wide-mouth bottle and hot fill bottle, etc.
Feeding system carries the preforms by robot automatically.
Infrared oven heater adopts the quartz lamp to heat the PET tube.
Fully automatic process with low investment, high efficiency, quick and safe operation, easy for trouble-shooting, maintenance and other benefits.

2-     Technical Parameter

1. Model: HB-CP            

2. Output: 2000-6000 bottles per hour base on 500 ml PET bottle

3. Mould:

Mould cavity number: 2 - 12        

The power to lock the mould: 38t    

4. The installation of temperature adjustment:

Heat up installation number: 2         

5. Power:

Overall requirement receives alone into electrical network, it is worked at the same time that this branch electrical network must not have the rate high frequency of great merit to use electrical equipment.

Install capacity: 32 KW          

Make hardworking rate: 25-70%     

Voltage: 380 V 3 three-phase  

Frequency: 50/60 HZ          

Note: the voltage and frequency according to your factory.

6. Compressed air:

Blow to mould air pressure: 1.2-3.0Mpa 

Control air pressure:     0.7-1.0 Mpa 

Blow to mould air rate of flow:

           0. 5-1.5m³ /min 

Control air rate of flow:    1.6m³ /min 

Pressure air temperature:    5-60     

Blow to mould air precision: 0.1 um      

Control air delivery rank:

Neatness and dryness neatness and dryness neatness and dryness

7 cooling water (can circulate to use )

Temperature: 5-25      

Pressure:    0.2 Mpa    

Rate of flow: 0.5 m3/h    

Refrigeration machine power: 5HP     

8. Weight: 

Main computer: 3T         

Elevator:     0.25 T       

9. Bottle type:

Volume:    500 ml    

Bottle high (highest) 250 mm  .

Biggest diameter: 90 mm    

10. Type preform: 120 mm      

Neck internal diameter: 14-27 mm  

Biggest bottle diameter: 36 mm   

11. Over all dimension ( length × width × high ):

1885×2300× 1950  

12. Promote machine size ( length × width × high ):

2000×800 × 3100 mm